| G
Code |
Description |
| G00 |
Positioning (Rapid traverse) |
| G01 |
Linear interpolation (Cutting
feed) |
| G02 |
Circular interpolation CW |
| G03 |
Circular interpolation CCW |
| G04 |
Dwell |
| G07.1 |
Cylindrical interpolation |
| (G107) |
| G10 |
Programmable data input |
| G11 |
Programmable data input cancel |
| G12.1 |
Polar coordinate interpolation mode |
| (G112) |
| G13.1 |
Polar coordinate interpolation cancel mode |
| (G113) |
| G17 |
XpYp plane selection |
| G18 |
ZpXp plane selection |
| G19 |
YpZp plane selection |
| G20 |
Input in inch |
| G21 |
Input in mm |
| G22 |
Stored stroke check function on |
| G23 |
Stored stroke check function off |
| G25 |
Spindle speed fluctuation
detection off |
| G26 |
Spindle speed fluctuation
detection on |
| G27 |
Reference position return check |
| G28 |
Return to reference position |
| G30 |
2nd, 3rd and 4th reference
position return |
| G31 |
Skip function |
| G32 |
Thread cutting |
| G34 |
Variable–lead thread cutting |
| G36 |
Automatic tool compensation X |
| G37 |
Automatic tool compensation Z |
| G40 |
Tool nose radius compensation
cancel |
| G41 |
Tool nose radius compensation
left |
| G42 |
Tool nose radius compensation
right |
| G50 |
Coordinate system setting or
max. spindle speed setting |
| G50.3 |
Workpiece coordinate system
preset |
| G50.2 |
Polygonal turning cancel |
| (G250) |
| G51.2 |
Polygonal turning |
| (G251) |
| G52 |
Local coordinate system setting |
| G53 |
Machine coordinate system
setting |
| G54 |
Workpiece coordinate system 1
selection |
| G55 |
Workpiece coordinate system 2
selection |
| G56 |
Workpiece coordinate system 3
selection |
| G57 |
Workpiece coordinate system 4
selection |
| G58 |
Workpiece coordinate system 5
selection |
| G59 |
Workpiece coordinate system 6
selection |
| G65 |
Macro calling |
| G66 |
Macro modal call |
| G67 |
Macro modal call cancel |
| G70 |
Finishing cycle |
| G71 |
Stock removal in turning |
| G72 |
Stock removal in facing |
| G73 |
Pattern repeating |
| G74 |
End face peck drilling |
| G75 |
Outer diameter/internal diameter
drilling |
| G76 |
Multiple threading cycle |
| G80 |
Canned cycle for drilling cancel |
| G83 |
Cycle for face drilling |
| G84 |
Cycle for face tapping |
| G86 |
Cycle for face boring |
| G87 |
Cycle for side drilling |
| G88 |
Cycle for side tapping |
| G89 |
Cycle for side boring |
| G90 |
Outer diameter/internal diameter
cutting cycle |
| G92 |
Thread cutting cycle |
| G94 |
Endface turning cycle |
| G96 |
Constant surface speed control |
| G97 |
Constant surface speed control
cancel |
| G98 |
Per-minute feed |
G99
|
Per revolution feed
|
No comments:
Post a Comment